|
Speedometer |
Range: 0 – 360 km/h (0-225 MPH) |
|
Display internal |
< 0.5 sec |
|
Odometer |
Range: 0 – 99999km/ mile
reset after 99999 km/ mile
Unit: 1km/ mile |
|
Trip meter A/B |
Range: 0-999,9km/ mile
reset after 999,9km/ mile
Unit: 0,1km/ mile |
|
Speeding warning light |
Range: 30 – 360km/h
(19 – 225 MPH)
Setting unit: 1 km/h (MPH) |
|
Top speed record |
0-360 km/h (MPH) |
|
Tire circumference |
Setting range: 300 – 2500 mm
Setting unitt: 1mm
Sensor points 6 |
|
Digital tachometer |
Range: 20 000 rpm
Unitt: 10 rpm |
|
Bar graph tachometer |
Bereich:
10 000 Upm / 166 Upm for each Segment
15 000 Upm / 250 Upm for each Segment
20 000 Upm / 333 Upm for each Segment |
|
RPM shift light |
Range: 5000 – 20 000 rpm
Setting unit: 100 rpm |
|
Pre shift light A / B |
Range 500 – 5000 rpm
before the shift light
Setting unit: 100 rpm |
|
max rpm record |
Range: 0 – 20 000 rpm |
|
RPM input pulse |
0.5, 1, 1.5, 2, 2,5 3, 4, 5, 6 |
|
Hour meter |
Range: 0 – 999.9 H |
|
Thermometer |
°c / °F |
|
Thermometer A/B: |
Range: 0 – 250 °c
(32 – 482 °F)
Unit: 0,1°c (°F) |
|
Temperature alarm A/B:B |
Range: 60°c – 250°c
(140°F – 482°F)
Unit: 1°c (°F) |
|
Max temperature record |
Range 0 – 250 °c (32 °F – 482 °F) |
|
Fuel meter |
Range: 0 - 100 %
Setting range: 100 Ohm / 510 Ohm |
|
Insufficient fuel warning |
Setting range: 10% - 50%
Setting unit: 10% |
|
Volt meter |
Range: 0-18.0V DC
Unit: 0,1VD C |
|
Target speed timer |
Range: 30 - 360 km/h (20 - 225 MPH)
Setting unit: 5 km/h (MPH) |
|
Target distance timer |
Range: 1/32 ~ 30/32 mile (50-1.500M)
Unit: 1/32 mile (50 M) |
|
Top speed timer |
1. Speed: 0 -360 km/h (0-225MPH)
2. Distance 0 - 999 M (0-3,280 feet)
3. RPM: 0-20000 Upm
4. Timer: 0-9"59"99 Sekunden |
|
Supply voltage |
12V DC |
|
Effective temperature range |
-10°c - +60°c |
|
Meter standard |
JIS D 0203 S2 |
|
Size |
100 x 60 x 20 mm |
|
Weight |
~ 200 g |
|
Telltales |
Speeding: red
Temperature alarm: red
Pre shift light A: yellow
Pre shift light B: orange
Hauptschaltlicht: red |
