FREE UK Postage On Orders Over £99.95
Call 01564 775522 for Sales & Technical Support
Authorised UK Distributor of Koso & Daytona

Motogadget m-Flash Digital Flasher Relay

Code: MOT2011
  • £29.95
Item in Stock | Usually dispatched within 24 hours
  • Offers:
  • Free UK Delivery when you spend £99.95
Loading...
FREE UK 48 hour Postage on Orders Over £99.95 Order before 1pm for next day delivery at extra cost
  • ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device  
  • ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
  • the wiring can be placed into the handle bar or frame tubes or into the wiring harness
  • almost load independent (min. 1 Watt)
  • completely implemented using digital semiconductor technology. microprocessor controlled. No mechanical workings, no spools, no electric contacts
  • consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
  • e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
  • immediate loss free and brighter illumination of all turn signal lights
  • utterly hassle-free connection using only two cables - just connect in series
  • completely water tight and vibration resistant because of the moulded-in construction
  • short circuit proof, automatic overload protection, switches power up to 100 W.
  • no heat generation while operating
  • only 5 - 18 V operating voltage required
  • also applicable for 6 V turn signal lights
  • quality 'made in Germany' - by motogadget

The m-Flash is by far the most compact load independent flasher relay on the market. It substitutes all conventional flasher relays, while still coming way out in front in terms of its small size and simplicity.


Dimensions: 
Casing (L x W x H): 18 mm x 13 mm x 9.5 mm 
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4 g 

Please note: If you are looking for a flasher relay with automatic deactivation please refer to our m-Stop series.

Further notes:
a) The m-Flash substitutes a conventional flasher relay. This flasher relay usually is implemented before the indicator switch.
The most convenient way to mount the m-Flash is to simply search and replace the original relay.

b) The m-Flash cannot replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.

c) Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules cannot be replaced or complemented by the m-Flash.

Delivery

We use Royal Mail for all shipments except for the specific FedEx service offered to international customers. 

Every effort will be made to dispatched the goods as soon as possible after your order has been accepted. However, we will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In this case, we may inform you of the delay and the reason for the delay as soon as is practical.

Royal Mail 24 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than one working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.

Royal Mail 48 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than two working day to be delivered. 


Free postage is only offered on UK 48 hour postage not any of the other services we provide.

 Returns

Goods which prove unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Subject to the following conditions:

-  Item(s) are returned carriage paid.
-  Item(s) are received in a resalable condition.
-  Item(s) should be returned unused in their original condition in order to secure a refund.
-  Item(s) are returned complete with all packaging in good condition. (We reserve the right to levy a charge to replace product packaging which is damaged or defaced).
-  We cannot accept any items which have been specially ordered for you or manufactured to your specification for return.
-  All returns are to be accompanied by the sender's name and address, invoice number (these are found on the invoice), and reason for return. 
-  We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage etc. You may require it in the event of a claim with your carrier.

Top