The m-Unit V.2 is the heart of your vehicle's electrical system: a digital hub for your motorbike. Operated by push-buttons, or more conventional switch controls mounted at the handlebar, you'll be able to take charge of all your vehicle's controls through the m-Unit V.2. It also doubles as a fuse panel.
How does it work? All switching operations are completely digitally controlled by a microprocessor - and the latest solid-state technology. It all happens completely without mechanical relays - truly taking vehicle electrical systems to a new level.
At roughly the size of a cigarette box, it's perfectly compact and completely moulded in. It's easily mounted by two M5 screws, with all cable connections made using terminal blocks. Add to that water, weather and vibration resistance, and the benefits of having the m-Unit V.2 really start to shine.
Features of the new version V.2
- reduced standby current of 0.35 mA (equivalent to 0.00035 A) if alarm system off, and 0.48 mA (equivalent to 0.00048 A) if alarm system on - for longerbattery life
- alarm system triggered by position-independent MEMS 3D gravity sensor. Installation in every position possible
- alarm system with adjustable pre-alarm and adjustable levels of sensitivity
- alarm system can be deactivated for easy transport mode
- integrated parking light
- voltage range of 3V to 20V
- can be used with 6V and 12V electrical systems
- with extended voltage range, starting of an engine with a large displacementor high compression is no longer a problem
- protected against reverse polarity
- protected against overvoltage
- extreme cable reduction by integrating all cables of switch or push buttons control including brake light switch in the handlebar. With only one cable the m-Unit V.2 is operated via a digital bus technology (product m-Button is required)
Dimensions and specifications
L/W/H: 101 x 61 x 28 mm
Weight: approx. 180 g
Fixture: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x M5 screw-on terminal for battery positive
Operating voltage: 3V - 20V
Operating temperature: -20 °C... +80 °C
1 x input (plus, switched) for ignition lock or m-Lock
7 x pilot input (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch or setup respectively
8 x output (plus) for left turn signal, right turn signal, low beam, high beam, starter, horn, brake light, AUX (switched plus for all other appliances)
m-Unit V.2, approx. 50 cm connector cable for battery plus terminal with 10 mm² nominal cross-section, 2 cable eyelets, 1 x M5 stainless steel screw, 2 x M5 stainless steel screw with nut, detailed installation and operating instructions
We use Royal Mail for all shipments except for the specific FedEx service offered to international customers.
Every effort will be made to dispatched the goods as soon as possible after your order has been accepted. However, we will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In this case, we may inform you of the delay and the reason for the delay as soon as is practical.
Royal Mail 24 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than one working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.
Royal Mail 48 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than two working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.
Free postage is only offered on UK 48 hour postage, not any of the other services we provide.
Goods which prove unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Subject to the following conditions:
- Item(s) are returned carriage paid.
- Item(s) are received in a resalable condition.
- Item(s) should be returned unused in their original condition in order to secure a refund.
- Item(s) are returned complete with all packaging in good condition. (We reserve the right to levy a charge to replace product packaging which is damaged or defaced).
- We cannot accept any items which have been specially ordered for you or manufactured to your specification for return.
- All returns are to be accompanied by the sender's name and address, invoice number (these are found on the invoice), and reason for return.
- We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage etc. You may require it in the event of a claim with your carrier.
- Restocking fee of 10% applies to all returned goods.