FREE UK Postage On Orders Over £149.95
Call 01564 775522 for Sales & Technical Support
Authorised UK Distributor of Koso & Daytona

Motogadget m.Unit Basic

Code: MOT2001
  • £244.95
Item out of Stock | Usually dispatched within 24 hours
  • Offers:
  • Free UK Delivery when you spend £149.95
Loading...
FREE UK 48 hour Postage on Orders Over £149.95 Order before 1pm for next day delivery at extra cost
  • Control over handle bar push-buttons or conventional switch control units
  • Completely replaces the fuse panel Up to 8 independent circuits are digitally monitored and de-energized in case of failures. After removal of the fault, the safety feature is automatically reset
  • Diagnostics for all circuits use 15 status LEDs
  • highest possible operational dependability with micro processor controlled and monitored switching operations
  • flexible feature configuration due to simple device setup
  • No mechanical relays - newest generation semiconductors switch quickly, free of loss and wear.
  • utterly compact dimensions
  • The m-Unit V.2 provides for hassle-free wiring and requires minimal wiring harnessing.
  • Control of high and low beam possible with only one push-button.
  • Digital hazard light control - stays on even after de-energizing the main system.
  • integrated digital, load independent flasher relay (like m-Flash), timer-controlled automatic deactivation.
  • selectable flasher mode with fade-in/fade-out effect like with the m-Wave! timer-controlled automatic deactivation.
  • Navigation light feature selectable over all turn signals! Permanent low-light at each turn signal.
  • integrated digital brake light modulator (like m-Stop), selectable flasher mode.
  • integrated alarm system (gravity field sensor)
  • intelligent deactivation of certain devices at engine startup
  • only one cable required to control combined rear and brake lights
  • completely water tight and vibration resistant

The m-Unit V.2 is the heart of your vehicle's electrical system: a digital hub for your motorbike. Operated by push-buttons, or more conventional switch controls mounted at the handlebar, you'll be able to take charge of all your vehicle's controls through the m-Unit V.2. It also doubles as a fuse panel.

How does it work? All switching operations are completely digitally controlled by a microprocessor - and the latest solid-state technology. It all happens completely without mechanical relays - truly taking vehicle electrical systems to a new level.

At roughly the size of a cigarette box, it's perfectly compact and completely moulded in. It's easily mounted by two M5 screws, with all cable connections made using terminal blocks. Add to that water, weather and vibration resistance, and the benefits of having the m-Unit V.2 really start to shine.

 

Features of the new version V.2

- reduced
 standby current of 0.35 mA (equivalent to 0.00035 A) if alarm system off, and 0.48 mA (equivalent to 0.00048 A) if alarm system on -  for longerbattery life
alarm system triggered by position-independent MEMS 3D gravity sensor. Installation in every position possible
alarm system with adjustable pre-alarm and adjustable levels of sensitivity
- alarm system can be deactivated for easy transport mode
- integrated parking light
- voltage range of 3V to 20V 

- can be used with 6V and 12V electrical systems
- with extended voltage range, 
starting of an engine with a large displacementor high compression is no longer a problem
- protected against reverse polarity
- protected against overvoltage
- extreme cable reduction by integrating all cables of switch or push buttons control including brake light switch in the handlebar. With only one cable the m-Unit V.2 is 
operated via a digital bus technology (product m-Button is required)

 

Dimensions and specifications

L/W/H: 101 x 61 x 28 mm
Weight: approx. 180 g
Fixture: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x M5 screw-on terminal for battery positive
Operating voltage: 3V - 20V
Operating temperature: -20 °C... +80 °C

1 x input (plus, switched) for ignition lock or m-Lock
7 x pilot input (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch or setup respectively

8 x output (plus) for left turn signal, right turn signal, low beam, high beam, starter, horn, brake light, AUX (switched plus for all other appliances)

 

Parts delivered

m-Unit V.2, approx. 50 cm connector cable for battery plus terminal with 10 mm² nominal cross-section, 2 cable eyelets, 1 x M5 stainless steel screw, 2 x M5 stainless steel screw with nut, detailed installation and operating instructions

Delivery

We use Royal Mail for all shipments except for the specific FedEx service offered to international customers. 

Every effort will be made to dispatched the goods as soon as possible after your order has been accepted. However, we will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In this case, we may inform you of the delay and the reason for the delay as soon as is practical.

Royal Mail 24 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than one working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.

Royal Mail 48 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than two working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.


Free postage is only offered on UK 48 hour postage, not any of the other services we provide.

 Returns

Goods which prove unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Subject to the following conditions:

-  Item(s) are returned carriage paid.
-  Item(s) are received in a resalable condition.
-  Item(s) should be returned unused in their original condition in order to secure a refund.
-  Item(s) are returned complete with all packaging in good condition. (We reserve the right to levy a charge to replace product packaging which is damaged or defaced).
-  We cannot accept any items which have been specially ordered for you or manufactured to your specification for return.
-  All returns are to be accompanied by the sender's name and address, invoice number (these are found on the invoice), and reason for return. 

-  We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage etc. You may require it in the event of a claim with your carrier.

-  Restocking fee of 10% applies to all returned goods.

Top