unique fade-in/fade-out effect
ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device
ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
the wiring can be placed into the handle bar or frame tubes or into the wiring harness
almost load independent (min. 1 Watt)
completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts
consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
immediate loss free and brighter illumination of all turn signal lights
utterly hassle-free connection using only two cables - just connect in series
completely water tight and vibration resistant because of the moulded-in construction
short circuit proof, automatic overload protection, switches power up to 100 W.
no heat generation while operating
only 5 - 18 V operating voltage required
also applicable for 6 V turn signal lights
quality 'made in Germany' - by motogadget
The m-Wave is the world's first digital flasher relay with a fade-in and fade-out effect. What's more - it's a revolutionary new design that's stunningly light, compact and load independent.
With the m-Wave, every flasher light model is faded in and out smoothly - even LEDs. Plus, it gives you a brand new look and style for your turn signal. While conventional hard switching flashers - especially LED models - will only blink, your m-Wave oscillates in a fascinating wave pattern. Ideal to draw more attention to all kinds of modded or styled motorbikes and cars.
Casing (L x W x H): 18 mm x 13 mm x 9.5 mm
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4 g
Please note: If you are looking for a flasher relay with automatic deactivation, please refer to our m-Stop series.
a) The m-Wave substitutes a conventional flasher relay. This flasher relay is usually implemented before the indicator switch.
The most convenient way to mount the m-Wave is to simply locate and replace the original relay.
b) The m-Wave cannot replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.
c) Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules cannot be replaced or complemented by the m-Wave.
We use Royal Mail for all shipments except for the specific FedEx service offered to international customers.
Every effort will be made to dispatched the goods as soon as possible after your order has been accepted. However, we will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In this case, we may inform you of the delay and the reason for the delay as soon as is practical.
Royal Mail 24 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than one working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.
Royal Mail 48 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than two working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.
*Free postage is only offered on UK 48 hour postage, not any of the other services we provide. Some products are not able to be posted as 48 hour tracked, mainly the bike lifts which are transported via freight or specific courier service.
Goods which prove unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Subject to the following conditions:
- Item(s) are returned carriage paid.
- Item(s) are received in a resalable condition.
- Item(s) should be returned unused in their original condition in order to secure a refund.
- Item(s) are returned complete with all packaging in good condition. (We reserve the right to levy a charge to replace product packaging which is damaged or defaced).
- We cannot accept any items which have been specially ordered for you or manufactured to your specification for return.
- All returns are to be accompanied by the sender's name and address, invoice number (these are found on the invoice), and reason for return.
- We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage etc. You may require it in the event of a claim with your carrier.
- Restocking fee of 10% might be applied to all returned goods that are not deemed faulty.
- If the item returned is faulty then returns postage will be refunded. It needs to be sent back 48 hour/standard service and nothing over a excessive amount. Please check with us on the amount if you are unsure.
Payment & Security
All our prices are inclusive of taxes & shipping charges are clearly displayed as soon as you put anything in your cart - so no nasty surprises after you've spent some time shopping! Payment is due at the point of ordering, and can be by credit/debit card through Paypal. We accept Visa, MasterCard American Express and Paypal.
Credit card details are protected by the Paypal approved Java encryption system. Details are not held in clear text on any website, and only decrypted after reaching our computer. If you prefer not to send your card details in this way, please call us.
All items show the current stock situation, however in the unlikely event of an item showing as in stock when ordered, but is not available your card/Paypal account will be refunded. Your Paypal or credit card statement/receipt will be in the name of Vmaxbitz.com Ltd, Paypal email will be email@example.com