FREE UK Postage On Orders Over £149.95
Call 01564 775522 for Sales & Technical Support
Authorised UK Distributor of Koso & Daytona

Aim Technologies MXS Strada Car Dash Display With Icons

  • £900.00
Item out of Stock | Usually dispatched within 24 hours
  • Offers:
  • Free UK Delivery when you spend £149.95
Loading...
FREE UK 48 hour Postage on Orders Over £149.95 Order before 1pm for next day delivery at extra cost

Display: 5″ TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 – 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 6 RGB freely configurable
Shift light: 10 integrated freely configurable RGB LEDs
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs: 4 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, lap signal, coil RPM input
Digital outputs: 1 (1 Amp max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors
Dimensions: 169.4x97x23 mm
Weight: 480 g
Power consumption: 400 mA
Waterproof: IP65

In the box

  • MXS Strada
  • USB cable
  • 14 pin standard wiring
  • 23 pin connector + contacts
  • Race Studio 3

Aim MXS Strada – The New Generation Compact TFT Dash Display

The Aim MXS Strada Dash Display is a 5″ color display. The MXS Dash is for use on tracks and streets. It acquires data from the ECU of your vehicle making it relatively easy to fit.

The Aim MXS Strada Dash Display is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. The MXS Strada has a 5″ color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and – optionally – the GPS Module. Its data sampling capability can also be incremented adding up to eight expansion modules.

ECU Connection

Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded on our support site and are published here. The support site includes over 1,000 different ECU’s both Stock and Racing. They are sorted by manufacturer/vehicle model and for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, Aim systems manage the following data lines:

  • CAN
  • RS232
  • K-Line
MXS Strada ECU Connection

Analog Digital Inputs

Aim systems analogue inputs are recorded up to 1,000 times per second each. You can connect and monitor all kinds of sensors, like:

  • Ratiometric potentiometers
  • Pressure sensors
  • Thermo-resistances
  • K-type thermocouples

and many others, all your custom sensors included

MXS Strada Analog Digital Inputs

Aim systems also feature digital inputs:

  • Speed signals – From the ECU, from the GPS and from the wheel sensors.
  • RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
  • Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter
MXS Strada also features six digital inputs

MXS Strada Second CAN

An innovative Aim MXS Strada Car Dash Display feature is its CAN2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more. This feature meets the requirements of a growing number of race drivers as the use of additional modules is becoming quite common in a number of race series.

Aim MXS Strada Second CAN

Math Channels

Aim systems gives you Math Channels values straight away and the dash logger can be configured to display those values (i.e. brake bias, calculated gear) all in real time.

MXS Strada Math Channels

High Contrast TFT Display

The Aim MXS Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the pushbuttons provided.

MXS Strada High Contrast TFT display

Watch Your Data in Pre-Configured Pages

The MXS Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

MXS Strada Preconfigured Pages

Flexible Shift Lights and Alarms

The ten multicolored RGB shift lights on the MXS Strada can be customized to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions and colors and you can select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

MXS Strada Flexible Alarms

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

MXS STRADA CAN

Two Digital Outputs

Aim MXS Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analogue / digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

MXS Strada Two Digital Outputs
Digital Output Pdf download

Switch Input Module

Switch Input Module

The Switch Input Module is a small compact Sim input device produced by us in the UK which provides a simple way to input voltage signals to the dash. The module allows for connection of lights, left and right indicators, dipped beam, main beam, hazard warning, in fact up to 14 independent voltage inputs, that are then sent to the display or logger through the CAN II stream, allowing you to turn on the symbols or lights on the display.

Switch Input Module

MXS Strada Connection Examples

MXS Strada Connection Example

Expand The System According To Your Needs

GPS Module

GPS Module

Delivery

We use Royal Mail for all shipments except for the specific FedEx service offered to international customers. 

Every effort will be made to dispatched the goods as soon as possible after your order has been accepted. However, we will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In this case, we may inform you of the delay and the reason for the delay as soon as is practical.

Royal Mail 24 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than one working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.

Royal Mail 48 Hour tracked is not a guaranteed service as noted in Royal Mail's terms and conditions we do not except any liability for shipments that take longer than two working day to be delivered. We cannot open an investigation with Royal Mail until after 1 week of the posted date.


Free postage is only offered on UK 48 hour postage, not any of the other services we provide.

 Returns

Goods which prove unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Subject to the following conditions:

-  Item(s) are returned carriage paid.
-  Item(s) are received in a resalable condition.
-  Item(s) should be returned unused in their original condition in order to secure a refund.
-  Item(s) are returned complete with all packaging in good condition. (We reserve the right to levy a charge to replace product packaging which is damaged or defaced).
-  We cannot accept any items which have been specially ordered for you or manufactured to your specification for return.
-  All returns are to be accompanied by the sender's name and address, invoice number (these are found on the invoice), and reason for return. 

-  We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage etc. You may require it in the event of a claim with your carrier.

-  Restocking fee of 10% might be applied to all returned goods that are not deemed faulty.

Top